"

Cookies ussage consent

I agree.

Our site saves small pieces of text information (cookies) on your device in order to deliver better content and for statistical purposes. You can disable the usage of cookies by changing the settings of your browser. By browsing our site without changing the browser settings you grant us permission to store that information on your device.

Stress analysis and thickness design of casting ceramics shells based on stereolithography prototypes

QU YINHU1,* , WANG FENG1, FU HANGUANG1,2

Affiliation

  1. School of Electromechanical Engineering, Xi'an Polytechnic University, Xi'an 710048, Shaanxi province, P . R China
  2. School of Materials Science and Engineering, Beijing University of Technology Beijing 100124, P. R. China

Abstract

In this paper , deformation and stress of casting shell and the resin prototype pattern are analyzed, getting the criterion of non crack. And sol id prototype pattern which is in the diameter of 30mm and hollow prototype pattern which is in the diameter of 30mm with thickness of 1mm are prepared, then coated and sanded, baked to get the casting shell. The results show that criterion of non crack of casting shell is based on cross sectional ratio M of casting shell, and hollow prototype pattern is more reasonable. When charging temperature is 80 to 100 o C , heating rate is 150 o C /h, the prototype pattern is heated to 950 o C for 30min, then the integrat ed casting shell is obtained..

Keywords

S tereolithography prototype, P hotocurable resin, I nvestment casting, S hell, S tress analysis.

Citation

QU YINHU, WANG FENG, FU HANGUANG, Stress analysis and thickness design of casting ceramics shells based on stereolithography prototypes, Optoelectronics and Advanced Materials - Rapid Communications, 10, 1-2, January-February 2016, pp.91-96 (2016).

Submitted at: July 14, 2014

Accepted at: Feb. 10, 2016