"

Cookies ussage consent

Our site saves small pieces of text information (cookies) on your device in order to deliver better content and for statistical purposes. You can disable the usage of cookies by changing the settings of your browser. By browsing our site without changing the browser settings you grant us permission to store that information on your device.

Distributed feedback fiber filter based on apodized fiber Bragg grating

NAZMI A. MOHAMMED1, AYMAN W. ELASHMAWY1, MOUSTAFA H. ALY2,*

Affiliation

  1. Research Center, College of Engineering, Arab Academy for Science, Technology and Maritime Transport, Smart Village, Cairo, Egypt
  2. Department of Electronics and Communications Engineering, College of Engineering, Arab Academy for Science, Technology and Maritime Transport, Alexandria, Egypt, Member of OSA

Abstract

This paper explores the potential of using Distributed Feedback Fiber (DFB-F) under lasing threshold as a C-band optical filter. This is done with the aid of an apodized fiber Bragg grating (FBG) using different apodization profiles. Design optimization is carried out to mainly target Ultra Dense Wavelength Division Multiplexing (UDWDM) filtering specifications. The raised cosine profile DFB-F with grating length (L = 30 mm) and modulation depth (no = 10-5) is chosen as the most suitable filter for UDWDM filtering specifications. This choice provides a Full Width at Half Maximum (FWHM) of 0.044 nm, no sidelobes and a peak reflectivity of 1.29. Compared to the famous apodized FBG based optical filter, this design gives a remarkable performance combined with compactness and easier fabrication..

Keywords

Distributed feedback fiber laser, Fiber Bragg gratings, Optical filters, Ultra dense wavelength multiplexing, Apodization profiles.

Citation

NAZMI A. MOHAMMED, AYMAN W. ELASHMAWY, MOUSTAFA H. ALY, Distributed feedback fiber filter based on apodized fiber Bragg grating, Optoelectronics and Advanced Materials - Rapid Communications, 9, 9-10, September-October 2015, pp.1093-1099 (2015).

Submitted at: July 23, 2015

Accepted at: Sept. 9, 2015